How to put in your contact lenses?
When you are about to put in a contact lens for the first time, it is not uncommon to feel apprehensive.
"Isn't it uncomfortable? Doesn't it hurt to stick your finger in your eye? Can I put the contact lens in wrong? All these questions are normal and legitimate. However, any contact lens wearer will tell you that once you've managed to put them in once, you can do it a hundred times without any problems.
To help you put in your lenses for the first time, here's a guide in five simple steps.
Step 1: Wash your hands
It is important to always wash your hands thoroughly before putting in your lenses.
You should carefully remove soap residue with water and dry your hands with a clean cloth that will not leave any residue on your hands.
This will prevent harmful germs from entering the eye when you put in the lenses.
Step 2: Prepare the lenses
Before you put in your contact lenses, you should rinse them again with a saline solution.
Caution: Always use a suitable cleaning product for rinsing and never use tap water, soap, or any other products. This could damage the lens.
For daily lenses, you only need to open the packaging. Single use makes rinsing unnecessary.
Step 3: Check the curvature
The next step is to gently place your lens on the tip of your index finger with the correct side up.
If you look closely at your lens, you will see that it bulges slightly upwards when placed with the correct side up. This allows the lens to surround the eye.
The lens is upside down when the edge is curved outwards. This check is important, because if the lens is put in the wrong way round, it will be very uncomfortable on your eye.
Step 4: Fitting your contact lens
Now that your lens has been properly cleaned and placed on your index finger with the correct curvature, it is possible to move on to the next step: lens application.
To do this, you need to pull your eyelid upwards with the index finger of your other hand. Then, with your other finger, you will gently pull your lower eyelid downwards so that your pupil is fully visible.
All that remains is for you to put the lens in your eye. To do this, we recommend that you attach the lens to your eye.
The lens will adhere by exerting a slight pressure when it touches the surface.
Step 5: Blink
When the lens is placed on the eye, you must blink several times to allow the lens to position itself correctly.
The hardest part is over, but don't forget that you have to do the same steps for the second eye.
Step 6: Enjoy your day
Congratulations! You have succeeded and there is nothing to stop you from enjoying your day.
It is normal at the beginning to feel like you need more time to put in your lenses. But once you have manage to put them in once, you will be able to put them in again.
You will develop a routine that will allow you to put them in within just a few minutes.